Whole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Before
After
Before
After
Before
AfterAbatement Technologies Duct Repair & Sealing in Gilbert: What to Know First
We provide independent Abatement Technologies duct repair and sealing in Gilbert, typically completing jobs in one visit with a written price delivered before any work begins. Most Abatement Technologies systems we see in Gilbert homes need sealing at flex-duct connections or repair of crushed runs in the attic rather than full replacement. As an independent Abatement Technologies service provider, we use OEM or quality aftermarket parts and back every job with our 365-Day Done Right Promise in writing.
This page is for Gilbert homeowners who own an Abatement Technologies air filtration or remediation unit connected to ductwork and have noticed uneven airflow, dust breakthrough, or rising utility bills. If that’s your situation, call (520) 666-7643 for a free estimate with a written price before we start.
How Abatement Technologies Products Fail - and How We Fix Them
- PREDATOR 600 Series: cracked polymer plenum collars. The PREDATOR 600’s injection-molded plenum connections fatigue faster than metal in Gilbert’s 115°F attic cycles. We see hairline cracks at the collar flange that leak conditioned air into the attic. Our fix: remove the damaged collar, fabricate a galvanized transition, and seal with mastic rated for 250°F continuous exposure.
- HEPA-AIRE SAH2 Series: flex-duct separation at the negative-pressure port. The SAH2’s high-static blower pulls 1,800 CFM through a 10-inch flex connection that wasn’t designed for that velocity. After three to five Arizona summers, the inner liner delaminates and the duct sags. We replace the original flex with reinforced, UL-181 listed duct and support it with strap hangers every four feet.
- ABATEMENT PAS2400: crushed return plenum in tight truss spaces. The PAS2400’s compact footprint gets wedged into 24-inch on-center truss bays in newer Gilbert builds, especially around Power Ranch. Installers often compress the flex to fit. We re-route the plenum with custom-fabricated rectangular duct to maintain full cross-section.
- Negative Air Machines: leaks at the filter-bank gasket interface. Abatement’s portable negative air units see hard use in remediation and the silicone gaskets harden in dry desert conditions. We replace with fresh gaskets and verify seal integrity with a smoke pencil test, not a hand-wave.
- UVGI Series: duct insulation degradation near the lamp housing. The UV-C lamps in Abatement’s UVGI line emit at 253.7 nanometers, which breaks down standard duct liner within 18 months in Gilbert’s already intense UV environment. We replace degraded liner with foil-faced, UV-resistant insulation and relocate the lamp housing if the original position is too close to the duct wall.
Our Abatement Technologies Duct Repair & Sealing Process
- 1
Visual and camera inspection. We run a borescope through every accessible duct run and photograph what we find. The photo tells you what’s in there. The price tells you what it costs to fix it. Everything else is just paperwork.
- 2
Written scope and price. Before any panel comes off, you get a written scope with line-item pricing under Haven Standard Clause 1. No exceptions.
- 3
Parts decision: OEM or quality aftermarket. For Abatement Technologies units still under manufacturer warranty, we use OEM collars, gaskets, and specified flex duct to preserve coverage. For out-of-warranty systems, we source quality aftermarket that meets or exceeds the original spec and document the substitution in your job record.
- 4
Repair and seal. We repair metal duct with proper slip joints and drive screws, seal all seams with mastic (not tape alone), and replace flex duct with UL-181 listed product. Every connection gets a tug test.
- 5
Pressure test and photo record. We verify seal integrity with a manometer reading across the system, then photograph every completed run. Your documented photo record is delivered as a standard deliverable, not an upsell.
- 6
Written guarantee. The 365-Day Done Right Promise goes in writing before we leave. Haven Standard Clause 5: Documented Accountability.
BeforeAfterWhat Abatement Technologies Duct Repair & Sealing Costs in Gilbert
| Service | Typical Range | What Moves the Price |
|---|---|---|
| Single flex-duct repair/replacement | $340 - $580 | Length of run, attic access difficulty, whether the plenum collar needs replacement |
| Plenum collar replacement (PREDATOR/SAH2) | $420 - $720 | OEM vs. quality aftermarket; metal fabrication vs. polymer replacement |
| Full system seal with mastic | $680 - $1,200 | Number of runs, square footage, whether we find prior tape-only “sealing” to correct |
| UVGI liner replacement and lamp relocation | $520 - $890 | Extent of liner degradation, new lamp housing if original is heat-damaged |
Every price is agreed in writing before work starts. We don’t do per-vent pricing or teaser rates that balloon once we’re on site. Call (520) 666-7643 for a free estimate with an exact number for your Abatement Technologies system.
Why Gilbert Homeowners Call CleanRun Air Duct Cleaning Gilbert for Abatement Technologies Work
We’ve been serving Gilbert since 2013, and we’ve documented every job with before-and-after photos since day one. The 365-Day Done Right Promise isn’t a policy subject to manager approval; it’s a written guarantee on every invoice.
Tomas Reyes, our owner and lead technician, has pulled enough pet dander and construction debris out of flex duct in Power Ranch to fill a contractor bag twice over. He knows the difference between a PREDATOR 600 collar crack and a simple loose connection, and he won’t charge you for the latter.
We also service Lennox, Trane, and Carrier systems, so if your Abatement Technologies unit ties into a mixed-manufacturer setup, we don’t need to call in another contractor. Background-checked, uniformed technicians under Haven Standard Clause 3: Verified Crews. License number published on every proposal.
FAQs
Independent service does not automatically void the warranty, but using non-OEM parts on a covered component can. We use OEM collars, gaskets, and specified flex on any Abatement Technologies unit still under manufacturer warranty, and we document the parts in your job record so you have proof if a claim arises. Call (520) 666-7643 if you need help determining your warranty status.
Replace when the flex liner is delaminated throughout the run, when metal duct has rust-through at multiple seams, or when the original installation used non-UL materials that can’t be brought to code. Repair when the damage is localized to a connection, a short crushed section, or a single failed collar. We show you the camera footage and give you both options in writing. Free second opinion on any written estimate from another contractor.
Standard collars, gaskets, and flex connections ship within two business days from regional distributors in Phoenix. We stock common PREDATOR and SAH2 hardware on our trucks, so most Gilbert jobs don’t wait. If your unit needs a discontinued part, we fabricate a metal equivalent that meets the original spec and document the substitution.
Most single repairs run two to three hours. A full system seal on a typical Gilbert home takes four to six hours, depending on attic layout and how much prior tape we need to remove and replace with proper mastic. We schedule by the job, not by the hour, so the price doesn’t change if we hit an unexpected snag.
We test with a digital manometer and record the pressure differential before and after. The numbers go in your job record alongside the photo documentation. If the post-repair reading doesn’t meet the spec we wrote on your proposal, we keep working until it does. That’s Haven Standard Clause 5.
Ready for a written price on your Abatement Technologies duct repair or sealing? Call (520) 666-7643. We’ll answer live, schedule at your convenience, and deliver a written estimate before any work begins.
Written by Tomas Reyes, Owner & Lead Technician, CleanRun Air Duct Cleaning Gilbert at CleanRun Air Duct Cleaning Gilbert, serving Gilbert and nearby areas.